The daily maintenance method of Organic Fertilizer equipment is particularly important, because once we do not operate at will according to precautions, even a small failure may cause big problems in production and use, and ultimately affect production.
First of all, let’s understand the Organic Fertilizer equipment process
It is mainly divided into the following two parts: Organic Fertilizer Compost Turning Machine, Compost Crusher, Rotary Screening Machine, And the Organic Fertilizer Granulator, Disc Granulator, Rotary Drum Granulator, Fertilizer Granules Compaction Machine, Rotary Dryer Machine, Rotary Cooler Machine, grading screen, Powder/Granules Fertilizer Packing Machine, and Belt Conveyor in the middle link.
Secondly, since we want to understand the daily maintenance methods of Organic Fertilizer fermentation equipment – ground Compost Turning Machine, let me briefly introduce the following two commonly used Compost Turning Machine types:
One, Wheel Type Windrow Compost Turning Machine is a special machine used to produce Organic Fertilizer and turn over viscous materials such as animal manure, sludge, distiller’s lees and furfural using strip compost fermentation process. The power is diesel engine. The stacking width of the material is 2 meters, the stacking height is about 0.8 meters, and the maximum processing capacity is 380m³/h. This machine can not only turn and gather the material evenly, but also effectively loosen the clumps in the fertilizer base after fermentation. It is an indispensable machine for harmless treatment of livestock and poultry manure and fertilizer making operations. Two, the use of Windrow Compost Turning Machine is very common, and it is a special machine for turning, crushing, oxygen supply and stacking of materials. This machine is mainly composed of four parts: turning auger power part, walking power part, hydraulic lifting part, control part.
The ground-type Compost Turning Machine produced by Zhengzhou Huaqiang Heavy Industry is designed according to the principle of aerobic fermentation, so that the fermentation bacteria have the space to give full play to their functions. Its machinery and equipment has the obvious advantages of less investment, low energy consumption, fast fertilizer production, and large output, saving a lot of civil construction and human and material resources.
Finally, let Xiaobian focus on the maintenance and maintenance of Compost Turning Machine
1.Com Maintenance and maintenance of post Turning Machine Daily maintenance:
The Compost Turning Machine should be maintained once a week when it is not often operated, and the Compost Turning Machine should be maintained once a day when it is often operated. Its maintenance content:
(1) Half maintenance inspection (after 10 hours of work), check whether the connection bolts, nuts and oil drain plugs are loose.
(2) Check all parts of the latch, cotter pin for defects, and timely replacement (cotter pin shall not be replaced with other things).
(3) Check whether the tilting knife is defective and whether the fastening bolts are loose, and if necessary, fill, tighten or replace the new knife.
(4) Check whether the electrical joints are tight, whether the insulation of the wire is good, and repair or replace it in time if necessary.
(5) Check whether the fastening screws of diesel engine, gearbox, bearing seat and other components are loose.
(6) Clean the bonded attachments on the Compost Turning Machine.
(7) Check the surplus of the fuel tank and water tank.
(8) Wheel Type Windrow Compost Turning Machine Should also pay attention to whether the tire pressure is normal.
2.Compost Turning Machine maintenance and maintenance Compost Turning Machine regular maintenance
(1) After working for a season, replace the gear oil of the reducer, check the bearings of all parts, apply new butter after disassembling and cleaning, and install it. If the wear is serious, it should be replaced.
(2) Remove the dust cover on the equipment, check and tighten the bolts on each transmission rod. Prevent the bolts on the transmission rod from loosening, resulting in the parts not being driven in place and causing the parts to wear and scrap.
(3) Remove the cab seat and cover plate under the seat and check to tighten the bolts on the drive shaft. Prevent the shaft body from being inclined and broken due to the loosening of the bolts on the drive shaft seat.
(4) Antifreeze should be added to the water tank when used in winter. If no antifreeze is added, warm water should be added to the water tank, body and cooler before operation, and the water in the water tank, body and cooler should be discharged after operation to prevent freezing.
(5) Check whether the electrical appliance is working normally, whether the circuit insulation performance is good, and replace the connected wire if necessary.
(6) It is necessary to regularly check the tension of the drive belt, adjust the tension if necessary, and check whether the belt is broken, worn or has other signs of aging, and replace the belt if necessary. Check the belt path and make sure there is no obstruction between the other parts of the engine and the belt. After replacing the belt, the new belt should be re-adjusted after two or three weeks of use to eliminate slack.
(7) When Compost Turning Machine is operated for a long time, the exposed parts should be coated with oil to prevent rust, and should be covered when placed outdoors.
3.Compost Turning Machine maintenance and maintenance of important components of compost Turning Machine
(1) Diesel engine maintenance and maintenance please follow the diesel engine manufacturer’s operating instructions for maintenance and maintenance.
(2) The maintenance of the car air conditioner (if equipped) see the operation and maintenance manual of the air conditioner.
(3) Compost Turning Machine battery maintenance:
- Make the battery firmly fixed.
- Terminals and connecting parts should be kept clean and firm.
- If Compost Turning Machine starts frequently for a short time, the battery may not be supplemented by the electric energy on the generator. Please check the battery memory power frequently and charge the battery in time to prevent the battery from being scrapped due to power loss.
- If the vehicle is not used for a long time, the battery wiring should be separated.
- When separating the battery, the negative wiring of the battery must be removed first and installed last.