Compost turning machine is a kind of equipment used for composting, fermentation and other processes in the production of organic fertilizer, which is commonly used in agriculture, chemical industry and other fields. In the process of use, some problems are inevitable. The following is an analysis of common causes of failure of compost turning machine to help you solve the failure problems quickly and promptly.
Power system failure
- The motor does not rotate: It may be a problem with the power connection, such as loose plug, broken circuit, etc., which will cause the motor to be unable to obtain power and cannot start. In addition, the failure of the motor itself, such as the burning of the motor winding, may be caused by long-term overload operation or poor heat dissipation.
- Power transmission failure: If it is a belt-driven compost turning machine, loose or broken belts will prevent power from being effectively transmitted. Loose belts may be due to stretching after long-term use, while broken belts may be due to poor belt quality or scratches by sharp objects.
Compost turning component failure
- Severe wear of the compost turning knife: Long-term contact and friction with the material, especially when handling materials with higher hardness, the compost turning knife will gradually wear, resulting in poor compost turning effect and insufficient material turning.
- The compost turning knife is loosely installed: The vibration during the operation of the equipment may cause the fastening screws of the compost turning knife to loosen, which not only affects the compost turning efficiency, but may also cause the compost turning knife to deviate during operation and even damage other parts.
- Chain plate wear or breakage: After long-term use, the friction between the chain plate and the material, the mutual wear between the chain plates, and the impact force of the material will cause the chain plate to gradually wear or even break. In addition, the quality problems of the chain plate itself, uneven tension during installation, etc., may also cause it to wear or break prematurely.
Control system failure
- Sensor failure: The operation of the compost turning machine often relies on various sensors to monitor the operating status. If the sensor fails, such as the temperature sensor failure, it may cause the equipment to fail to accurately adjust according to the ambient temperature or material temperature.
- Control line failure: Loose terminals in the control line, short circuits due to moisture in the line, etc., will cause the control system to issue wrong instructions or fail to control the operation of the equipment normally.
The above is an analysis of the common causes of failure of the compost turning machine. Understanding these causes of failure will help to repair and maintain the compost turning machine in time and improve the service life and work efficiency of the equipment.